Motorola HT1250

HNN4001

IMPRES, NiMH, 1800 mAh, 7.5V Battery

HNN4003

impres Li-ion, 2000 mAh, 7.5V Battery

Motorola impres™ batteries,when used with a Motorola impres charger, provide automatic, adaptive reconditioning, end of life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique impres communication protocol which is designed to maximize talk time and optimize battery cycle life - all automatically.

Motorola Lithium Ion (Li-ion) batteries have a higher energy-to-weight ratio than NiMH batteries, offering a lighter, smaller power supply for more compact devices. They also offer a major advantage of not experiencing "memory effect."

HNN9009

Battery NiMH 1900 mAh 7.5V

Motorola HNN9009AR Battery NiMH 1900 mAh 7.5V

Premium high-capacity NiMH battery for HT-series, PR860 and MTX-series portables.

HNN9013

Battery Li-ion 1200 mAh 7.5V

PMNN4455

Li-ion, 2700 mAh Battery

4280384F89

RadioPAk Extension Belt. For waists larger than 40 inches. RadioPAk Extension Belt. For waists larger than 40 inches.

HLN7020

Carry case strap adapter Carry case strap adapter to allow public safety microphone to fit properly when using a carry case

HLN9689

Leather Carry Case w/Belt Loop DTMF

HLN9694

Leather Carry Case w/Swivel DTMF

HLN9945

Leather Carry Case (Hard) w/Belt Loop

HLN9955

Leather Case (Hard) w/Swivel DTMF

HLN9998

Leather Carry Case w/Swivel

RLN4570

Break-Away Chest Pack

All the features of the original Universal Chest Pack (HLN6602A) plus break-a-way tabs that allow the entire pack to be pulled off with approximately 10 lbs. of pressure.

RLN4815

RadioPAk Radio/Utility Case

The RadioPAk is lightweight and comfortable. Worn around the waist, it keeps radios/phones at hand. It features a separate 6 x 8 inch zippered pouch for other on-the-job necessities.

Adjustable woven nylon belt fits both men and women.

TDN9327

Portable Radio Hanger for door panels up to 2.75 inches Portable Radio Hanger - for door panels up to 2.75" (slides over and hangs from the door panel in vehicle). Radio Belt Clip is required for use.

AAHTN3000

Charger Single Unit Rapid Rate

HLN9794

Charger Insert Spacer Charger Insert Spacer - Compatible with "B", "C" & "D" version chargers ONLY

NLN7967

Wall Mount for Multi-Unit Charger

This is a wall mount for IMPRES™ multi-unit charges. IMPRES battery chargers ensure maximum talk time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features

NNTN7618

IMPRES Vehicular Charger (Hard Install) IMPRES Vehicular Charger (Hard Install)

RLN4883

Travel Charger

PMLN5198

IMPRES Single Unit Rapid Rate Charger Power Supply IMPRES Single Unit Rapid Rate Charger with CEC Compliant Switch Mode Power Supply

RLN5382

Charger Display Module for IMPRES Multi-Unit Charger with Software

This module is compatible with the standard IMPRES Multi-Unit Charger WPLN4108BR, WPLN4109BR and WPLN4110BR. Up to 6 modules can be used per charger, one for each charging pocket. Includes detailed installation instructions.

WPLN4182

IMPRES, Single Unit Charger

WPLN4192

IMPRES Multi Unit Charger w/Display Modules

WPPN4082

Adapter Plate Only (for Motorola Conditioning Chargers) Adapter Plate Only (for Motorola Conditioning Chargers)

5080370E97

Replacement Rubber Eartips, Clear - Pack of 25 Pack of 25. For RLN6232A and RLN6241A.

AARLN4885

Receive-Only Covered Earbud with coiled cord

This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone.

AARMN4022

Earpiece w/Mic and PTT 2-Wire (Beige)

AARMN4029

Earpiece w/Mic and PTT 2-Wire (Black)

ENMN4013

Flexible Ear Receiver (flexible earloop & speaker that rests external

ENMN4017

3-Wire Surveillance Kit Biege

RLN4922

Completely Discreet Earpiece Kit

Enables users to communicate with ease, in full privacy, without visible equipment.

This miniaturized receiver is discreetly hidden in the ear, where it can be worn comfortably for long periods of time. Small as it is, it offers a full range of audio functions including automatic squelch, automatic gain control and noise filtering. Average battery life is approximately 100 hours and includes an end-of-life warning signal when the battery needs to be changed. Kit includes wireless receiver, inductive neck loop, 6 spare batteries and 5 spare ear guards. For use with any standard 2 or 3-Wire Motorola Surveillance Kit.

Simply Remove the earpiece from any standard 2 or 3- Wire Surveillance Kit and plug in the neck loop, which is easily hidden under clothing.

RLN5316

Surveillance Kit With Extended-Wear Comfort Earpiece This surveillance kit includes an extended-wear comfort earpiece with rubber eartip and quick-disconnect, clear, comfortable acoustic tube. Users hear transmissions clearly, while the clear tube provides a discreet appearance. This beige, 2-wire kit has a combined microphone and Push-to-Talk feature.

RLN6230

Extreme Noise Kit.

Includes 2 foam earplugs. For high-noise environments. Noise reduction = 24dB. Can be used with Clear Comfortable Earpieces, Black

Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories.

Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.

RLN6231

Extreme Noise Kit.

Includes 2 foam earplugs. For high-noise environments. Noise reduction = 24dB. Can be used with Clear Comfortable Earpieces, Beige

Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories.

Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.

RLN6241

Low Noise Kit - Clear Acoustic Tube Assembly.

Includes 1 clear rubber eartip. For low-noise environments, does not provide hearing protection, Beige

Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories.

Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.

RLN6511
RLN6512
RLN6513

EP7 Sonic Defender, use with RLN4941

WADN4190

Receive-Only Flexible Earpiece with 3.5mm plug

This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone.

0180300E83

Remote Push-to-Talk Body Switch This leaves the user's face unobstructed from an external microphone hence making it more suitable for personnel wearing breathing apparatus, helmet and other protective masks. This ear microphone system is also equipped with an external VOX circuit for total hands-free operation eliminating the need to use the PTT button. All you have to do is speak and your message will be transmitted clearly to the receiving party.

BDN6677

Ear Mic Std, Black. For standard noise levels (up to 95dB).

This compact, lightweight unit picks up sound through bone vibrations in the ear canal. The miniature earpiece leaves the hands-free and face unobscured, good for rescue and emergency personnel that must retain the ability to help, hear and speak directly to others... those not on the communication system. EMS may be worn with protective masks without reduction in clarity of sound. It's ideal for high-noise environments.

Interface Module is required and sold separately.

BDN6769

Ear Microphone, Beige (Intrinsically Safe (FM)) Ear Microphone, Beige (for noise levels up to 95dB) - requires Interface Module (EX500 & EX600•XLS - Intrinsically Safe (FM))

AARMN4017

Ultra - Light Headset with Boom Microphone, Earbud Style Receiver - Intrinsically Safe (FM)

AARMN4019

Medium Weight over - the - head Dual Muff Headset with Noise Cancelling Microphone & In - Line PTT - Noise Reduction Rating = 24dB - Intrinsically Safe (FM)

AARMN4020

Push - to - Talk or (VOX) Voice Activated Heavy-Duty Dual Muff Headset with Noise Cancelling Microphone and PTT on Earcup, Noise Reduction Rating = 24dB - Intrinsically Safe (FM)

AARMN4032

Headset Med Dual-muff

ENMN4016

Medium Duty Headset, behind - the - head, with In - Line PTT & Noise Cancelling Boom Microphone, Noise Reduction Rating = 24dB - Intrinsically Safe (FM)

PMLN6088

Headband Headset with Nexus Jack

PMLN6803

Audio Adapter ATEX Small PTT Adapter

RKN4097

Cable Adapter PTT

RMN4051

Two-way, Hardhat Mount Headset with Noise-Canceling Boom Microphone. Black.

Ideal for two-way communication in high-noise environments, this headset mounts easily to hardhats with slots, or can be worn alone. Easily replaceable ear seals are filled with a liquid and foam combination to provide excellent sealing and comfort. 3-foot coiled cord assembly included. Noise reduction of 22dB.

Separate In-line PTT Adapter Cable RKN4095A required.

Hardhat not included.

RMN4053

Tactical Hardhat Mount Headset. Grey, Noise reduction = 22dB

Ideal for two-way communication in extremely noisy environments. Dual-Muff, tactical headsets include 2 microphones on outside of earcups which reproduce ambient sound back into headset.

Harmful sounds are suppressed to safe levels and low sounds are amplified up to 5 times original level, but never more than 82dB. Has on/off volume control on earcups. Easily replaceable ear seals are filled with a liquid and foam combination to provide excellent sealing and comfort. 3-foot coiled cord assembly included.

Adapter Cable RKN4095A required.

RMN4056

RX Only Hardhat Mount 3.5MM RT Angle Plug

RMN5015

Racing Headset - Same headset worn by pit crews on the CART racing circuit. Heavy-Duty, behind - the - head (can be worn with hardhat) Headset with Noise Cancelling Swivel Boom Microphone. Noise Reduction Rating = 24dB (adapter cable required and sold separately)

RMN5048

Rugged Temple Transducer Rugged Temple Transducer - Fully adjustable over-the-head style headset allows user to receive audio through the temples. Headset comes with a larger In-Line PTT and a larger noise canceling boom microphone than the standard model - Intrinsically Safe (FM)

RMN5133

3M Peltor HT Series Listen Only, HTM79P3E - 34, Communications Headset Helm

3015829H01

Replacement Cable for Remote Speaker Microphone (PMMN4021)

PMMN4021

Remote Speaker Microphone with Ear Jack

PMMN4039

REMOTE SPEAKER MIC, NC (PROF) This microphone is water-resistant and allows talking and listening without removing the radio from the belt or case. The noise-canceling acoustics utilize a directional microphone to help eliminate ambient noise making it easier to use in high-noise environments.

RMN5035

UHF Public Safety Microphone, 30" Straight Cable UHF Public Safety Microphone, 30" Straight Cable with 3.5mm Audio Jack, volume switch and antenna (450-470 MHz Only)

RMN5075

UHF Public Safety Microphone, 24" Straight Cable UHF Public Safety Microphone, 24" Straight Cable with 3.5mm Audio Jack, volume switch and antenna (450-470 MHz Only)